NC-series Juice /tea Beverage High Pressure Homogenizer

Beverage High Pressure Homogenizer

1. Technical features:

1.1 lubrication

Selection of high pressure oil resistant hose, forced injection type and splash type combined lubrication system, under the same production conditions, the oil temperature can maintain a relatively stable temperature, and the oil viscosity is not easy to dilute, continue to play a good lubrication effect; At the same time, the circulating cooling system is adopted to greatly reduce the temperature of the transmission box and the loss of lubricating oil. (Note: The forced injection system is also called anti-lock braking system. It is directly injected into the middle of the bearing bush through the high-pressure oil-resistant hose, so that the contact surface between the bearing bush and the crankshaft all forms a lubrication surface, which changes the defect that the temperature rise of the transmission box is too high in the traditional way of using the contact surface between the bearing bush and the crankshaft without direct oil lubrication.)

1.2 transmission case

Crankshaft made of alloy ductile iron and special alloy steel, wear-resistant, long service life; Crankshaft transmission adopts Haff type, intermediate support structure (well avoid the accumulation of stress caused by crankshaft working for a long time), modular, reasonable structure, convenient maintenance; Transmission shaft and crankshaft adopt helical gear low speed transmission, low noise, good stability. The cover of the transmission box is sealed by O type with good sealing effect. Refueling of transmission box is simple and convenient, more humanized.

1.3 parts,

The homogeneous valve, one-way valve and plunger are made of special alloy steel, which has the characteristics of wear resistance, impact resistance and long service life. At the same time, they can adapt to any disinfection process (including CIP). In special cases, the homogeneous valve and one-way valve can use tungsten alloy steel, which can also adapt to any disinfection process. All kinds of sealing materials have the characteristics of wear resistance, non-toxic, high temperature resistance and long service life. (Note: homogeneous valve, one-way valve, plunger, seals have reached the international advanced level, can completely replace the import) the replacement of wearing parts worry, labor saving, simple (replacement of plunger, plunger seal ring and other parts do not need to remove the pump body).

1.4 Pump body structure

Pump body high pressure sealing gland adopts square gland, high strength, better sealing effect, fastening nut for cover nut, shape coordination, beautiful. The pump valve body and material passage are in line with food hygiene standards and pharmaceutical standards. Import and export pipe fittings are connected with pump body and valve body by movable joint, which is convenient for pipeline installation and disassembly. The pump valve body has been treated with special solution to enhance the flexibility of the pump valve body and greatly prolong the service life.

1.5 models

Jinzhu homogenizer (high pressure pump) adopts horizontal model, good stability, shell adopts 304 stainless steel.

(Note: front and two sides are equipped with moving doors, operation, repair and maintenance without removing the shell, shell without burr and sharp mouth).

1.6 energy saving

Jinzhu homogenizer (high pressure pump) is designed with low energy consumption and high efficiency. Through forced cooling injection system, it has obvious energy-saving effect under the same production conditions. (Note: general 5000-30 motor power is 55KW, compared with jinzhu homogenizer (high pressure pump) JZH5000-30 motor power is only 45KW, greatly reducing the cost of homogenizer (high pressure pump).)

The above mentioned jinzhu homogenizer (high pressure pump) technical characteristics have a national patent.

Technical Parameters

FAQ

Q1:Do you have any reference project?
>> A1:We have reference project in most countries, and you can visit their factories if we get the permission of the customer.

Q2:What's your guarantee or the warranty of the quality if we buy your machines?
>>A2:We offer you high quality machines with 2 years guarantee . we will give u spare part free in 2 years.

Q3: Do you provide customized service?
>> A3: We will customize the machine according to your needs, materil ,power,filling type,the kinds of the bottles and so on.

Q4:When can I get my machine after I paid?
>> A4:We will deliver the machines on time as the date we agreed both side.

Q5:How can I install my machine when it arrives?
>> A5:We will send our engineer to your side as soon as you get all your machines ready, for testing and teaching your technicians how to run the machines.